Hot Products
0102030405
High Penetration Solvent-Free Epoxy Primer for Floors - Durable Sealing from China's Leading Suppliers and Factory
Application
Workshop floors, garage parking lots, sports stands, pools, warehouses, storage tanks, etc.
Product Parameters
Primer A component
| Characteristics | Unit | Colorless or slightly yellow transparent liquid |
|---|---|---|
| Flash point | ℃ | 150 |
| Viscosity (25℃) | mPa•S | ≤ 1000 |
| Density (25℃) | g/ml | About 1.0 |
Primer B component
| Characteristics | Unit | Brown liquid |
|---|---|---|
| Viscosity (25℃) | mPa•S | ≤ 1 000 |
| Density (25℃) | g/ml | 1.10 ~ 1.60 |
Construction Parameters
| Surface treatment | Construction can be carried out after the substrate has been properly treated. |
| Mixing ratio (weight ratio) | Customers must stir evenly before use Primer A component: Primer B component = 2:1 (weight ratio) |
| Theoretical coating rate | For a 0.1mm thick dry coating, roller coating requires 0.15-0.2Kg/m2 of paint, and spray coating requires 0.2-0.3Kg/m2. |
| Operation time | 40-60 minutes |
| Cleaning agent | Special diluent |
| Drying time | Surface drying: less than 6 hours; through drying: less than 24 hours. |
| Re-coating interval | The next step can only be carried out after confirming that the coating has dried. |
Main performance indicators of paint film
| Project | Unit | Technical indicators | Test Standards |
|---|---|---|---|
| Dry time | h | ≤ 6 | GB/T 1728 |
| Working time | h | ≤24 | - |
| Pull-off adhesion | MPa | ≥2.5 concrete | GB/T 5210 |
Drying time
| Substrate Temperature (℃) | Surface Dry (h, max) | Through Dry (h, max) | Recoating Interval |
|---|---|---|---|
| 23 | 8 | 24 | Min. 8 h, no upper limit |
Construction conditions
- Painting environment temperature range: 5～35℃. The base surface temperature is at least 5℃ higher than the air dew point temperature.
- Painting environment humidity range: 30～80%.
- Ventilation conditions: Ensure that the construction site is well ventilated and dust-free, and there should be supervisors in confined spaces.
- Note: The paint must be mixed evenly in strict accordance with the proportion marked on the certificate.
Construction method
- Spraying: Use conventional spraying or airless spraying. It is recommended to use airless spraying for large-scale construction.
- Roller coating: Use for large-scale construction.
- Brush coating: Use for small areas. Use a soft-bristled brush or roller brush.
Packaging specification
Iron drum packaging. DT-04 A: 20 kg/drum, DT-04 B: 10 kg/drum.
Storage
This product should be stored in a cool, dry, ventilated indoor warehouse, storage period of half a year.
Safety
All fire sources are strictly prohibited in the batching and construction sites, and good ventilation is maintained. Lacquer splash on the skin should be washed immediately with soapy water, splash into the eyes, should be immediately washed with plenty of water, and then find a doctor to check.
Construction steps
First step: clean the foundation, fill in the gaps
Second Step: Roll primer
Third step: self-leveling cold polyurea floor construction
Forth step: Brush waterbased PU top coat
Frequently Asked Questions (FAQ)
What are the main applications for DT-04?
DT-04 is widely used for workshop floors, garage parking lots, sports stands, swimming pools, warehouses, storage tanks, and other similar industrial or commercial floorings.
What is the mixing ratio of Primer A and B components?
The mixing ratio is Primer A component : Primer B component = 2:1 by weight. It must be stirred thoroughly and evenly before application.
What is the theoretical coating rate for this product?
For a dry coating thickness of 0.1mm, roller coating requires approximately 0.15-0.2 Kg/m² of paint, while spray coating requires about 0.2-0.3 Kg/m².
What are the environmental requirements for construction?
The painting environment temperature should be between 5～35℃, and the base surface temperature must be at least 5℃ higher than the air dew point. The humidity range should be between 30～80% with good ventilation.
How long does it take for the paint film to dry?
At a substrate temperature of 23℃, the surface drying time is less than 6 to 8 hours, and through drying is achieved in less than 24 hours. The minimum recoating interval is 8 hours.
How should the product be stored and what is the shelf life?
The product must be stored in a cool, dry, and well-ventilated indoor warehouse. The standard storage period is half a year (6 months) from the date of manufacture.