China Suppliers Factory Waterbased Rigid Polyurethane Surface Coat for Durable Industrial Flooring
Characteristics of the Product
- High hardness, strong scratch resistance, high pollution resistance
- Make the substrate color bright, waterproof, resistant to yellowing
- Strong wear resistance, high resistance to pollution, can be repeatedly washed with water
- No radiation, green environmental protection, high pressure resistance, good ultraviolet light resistance
- Fast construction and economical cost
Product Parameters
| Item Number | SQM-A01B02 |
| Surface Gloss | Semi-light |
| Component | Two |
| Pencil Hardness | ≥3H |
| 5% H₂SO₄ | No change in 7 days |
| % NaOH | No change in 7 days |
| Suggested Thickness of Dry Film Layer | 150–200 µm |
| Water Resistance | No change in 30 days |
| Substrate Temperature (℃) | 15–25 |
| Surface Drying Time (H) | 2 |
| Real Dry (H) | 24 |
Applications
Laboratory, research and development room, pharmaceutical factory, parking lot, subway station, supermarket, warehouse, heavy-load industrial plant, etc.
Packing
Storage
This product should be stored in a cool, dry, ventilated indoor warehouse; storage period is half a year. Safety: Strictly prohibit all fire sources for bottom coating ingredients and construction sites, and maintain good ventilation. Construction personnel must wear protective equipment to prevent the inhalation of paint mist and damage to the eyes and skin. Base coating splashed on the skin should be immediately cleaned with soapy water. If splashed into the eyes, immediately wash with a large amount of water, then seek medical attention.
Construction Conditions
Coating temperature range 5–35℃, relative humidity below 80%; temperature and humidity should be measured near the substrate. When the surface temperature of the substrate is higher than 40℃, it is recommended not to proceed with construction. Rain, snow, wind, sand, and other severe weather conditions are not suitable for painting.
Operation Methods and Requirements
Coating temperature range 5–35℃, relative humidity below 80%; temperature and humidity should be measured near the substrate. When the surface temperature of the substrate is higher than 40℃, it is recommended not to proceed with construction. Rain, snow, wind, sand, and other severe weather conditions are not suitable for painting.