Hot Products
0102030405
China Suppliers Factory Waterbased Rigid Polyurethane Surface Coat for Durable Industrial Flooring
Characteristics of the Product
- ✦ High hardness, strong scratch resistance, high pollution resistance
- ✦ Make the substrate color bright, waterproof, resistant to yellowing
- ✦ Strong wear resistance, high resistance to pollution, can be repeatedly washed with water
- ✦ No radiation, green environmental protection, high pressure resistance, good ultraviolet light resistance
- ✦ Fast construction and economical cost
Product Parameters
| Item Number | SQM-A01B02 |
| Surface Gloss | Semi-light |
| Component | Two |
| Pencil Hardness | ≥3H |
| 5% H₂SO₄ | No change in 7 days |
| % NaOH | No change in 7 days |
| Suggested Thickness of Dry Film Layer | 150–200 µm |
| Water Resistance | No change in 30 days |
| Substrate Temperature (℃) | 15–25 |
| Surface Drying Time (H) | 2 |
| Real Dry (H) | 24 |
Applications
Applicable to the floor, color sand floor, marble floor, road surface color change, etc.
Laboratory, research and development room, pharmaceutical factory, parking lot, subway station, supermarket, warehouse, heavy-load industrial plant, etc.
Packing
📦
Component A (Main Agent):
18.2 kg
18.2 kg
🧪
Component B (Curing Agent):
1.8 kg
1.8 kg
Storage
This product should be stored in a cool, dry, ventilated indoor warehouse. Storage period: half a year.
⚠ Safety Notice: Strictly prohibit all fire sources for bottom coating ingredients and construction site, and maintain good ventilation. Construction personnel must wear protective equipment to prevent the inhalation of paint mist and damage to the eyes and skin. Base coating splash on the skin should be immediately cleaned with soapy water. If splash gets into the eyes, immediately wash with a large amount of water and then consult a doctor.
⚠ Safety Notice: Strictly prohibit all fire sources for bottom coating ingredients and construction site, and maintain good ventilation. Construction personnel must wear protective equipment to prevent the inhalation of paint mist and damage to the eyes and skin. Base coating splash on the skin should be immediately cleaned with soapy water. If splash gets into the eyes, immediately wash with a large amount of water and then consult a doctor.
Construction Conditions
Coating temperature range 5–35℃, relative humidity below 80%. Temperature and humidity should be measured near the substrate. When the surface temperature of the substrate is higher than 40℃, it is recommended not to proceed with painting. Rain, snow, wind, sand, and other severe weather conditions are not suitable for painting.
Operation Methods and Requirements
Coating temperature range 5–35℃, relative humidity below 80%. Temperature and humidity should be measured near the substrate. When the surface temperature of the substrate is higher than 40℃, it is recommended not to proceed with painting. Rain, snow, wind, sand, and other severe weather conditions are not suitable for painting.
Construction Instructions
Apply To
Wear-resistant floor, wall, cement
Construction Method
Traditional spraying, rolling coating
Mixing Ratio (Weight)
A : B = 10 : 1
(Construction after 5 minutes of mixing)
(Construction after 5 minutes of mixing)
Frequently Asked Questions
Q
What surfaces is this polyurethane surface coat suitable for?
This product is suitable for wear-resistant floors, color sand floors, marble floors, road surfaces, as well as environments such as laboratories, pharmaceutical factories, parking lots, subway stations, supermarkets, warehouses, and heavy-load industrial plants.
Q
What is the mixing ratio of Component A and Component B?
The mixing ratio by weight is A : B = 10 : 1. After mixing, wait 5 minutes before beginning construction to ensure proper activation of the curing agent.
Q
What are the recommended construction temperature and humidity conditions?
The coating temperature range is 5–35℃ with relative humidity below 80%. Avoid construction when the substrate surface temperature exceeds 40℃, or during rain, snow, wind, or sandstorm conditions.
Q
How long does it take for the coating to fully dry?
The surface drying time is approximately 2 hours. Full cure (real dry) is achieved within 24 hours under standard conditions (substrate temperature 15–25℃).
Q
How should this product be stored, and what is its shelf life?
Store in a cool, dry, and well-ventilated indoor warehouse. The shelf life is half a year from the date of production. Keep away from direct sunlight and heat sources.
Q
What safety precautions should be taken during application?
Strictly prohibit all fire sources near the coating ingredients and construction site. Maintain good ventilation at all times. Construction personnel must wear protective equipment to prevent inhalation of paint mist and contact with eyes and skin. If the coating contacts skin, clean immediately with soapy water. If it enters the eyes, rinse thoroughly with large amounts of water and seek medical attention promptly.